Eurotherm 590SP, Product Manual

Page: 186 / 259

Appendix H RS422 Communications (Ports P1 & P2)
590SP Digital Product Manual App. H - 18
H
Block 3
PNO ASCII TAG Access Bit data ASCII Binary Limits Description
mnemonic type format data
format
24 18 030 R/W 21 xxx.xx ±200.00 Additional Current Demand
25 19 015 R/W 21 xxx.xx 0/200.00 Main Current Limit
26 1A 087 R/O 21 xxx.xx 0/200.00 +ve Current Clamp
27 1B 088 R/O 21 xxx.xx 0/200.00 -ve Current Clamp
28 1C 016 R/W 21 xxx.xx 0/200.00 Current Loop P Gain
29 1D 017 R/W 21 xxx.xx 0/200.00 Current Loop I Gain
30 1E 171 R/W 21 xxx.xx 0/100.00 Field Current Setpoint
31 1F 116 R/O 23 xxxxx Health Store
0 Over Speed
1 Missing Pulse
2 Field Over Current
3 Fin Over Temperature
4 Motor Over Temperature
5 Field Over Volts
6 Speed Feedback
7 Encoder Fail
8 Field Fail
9 Three Phase
10 Phase Lock Loop
11 5703 Receive Error
12 Stall Trip
13 Over Current Trip
14 Cal. Card
15 ACCTS Failed.
Block 4
PNO ASCII TAG Access Bit data ASCII Binary Limits Description
mnemonic type format data
format
32 20 060 R/O 21 xxx.xx Armature Volts
33 21 058 R/O 21 xxx.xx Analog Tach
34 22 059 R/O 21 xxxxx Encoder
35 23 064 R/O 21 xxx.xx Speed Error
36 24 132 R/W 21 x.xxxx ±3.0000 P3 Setpoint Ratio
37 25 014 R/W 21 xxx.xx 0/200.00 Speed Loop P Gain
38 26 013 R/W 21 xx.xxx 0.001/30.000 Speed Loop Time Constant (SEC)
39 27 23 xxxxx
161 R/W 0 0/1 Aux. Start
168 R/W 1 0/1 Aux. Enable
- 2 - 7 Reserved
288 R/W 8 0/1 External Ramp Reset
287 R/W 9 0/1 Auto Reset
113 R/O 10 Ramping
303 R/W 11 0/1 Reset Ramp to Speed Feedback