Section 3
Page 3 - 8
MODEL 346 INSTALLATION AND OPERATION MANUAL
HA243821
Issue 5 Mar 98
Figure 3.2.3a Preparing the chart
3.2.3 Z-FOLD CHART REPLACEMENT
PREPARING THE CHART
Remove the cassette from the recorder, as described in
section 3.2.1 above
Remove the chart from its box and fan it (figure 3.2.3a)
from both ends. Once this has been done, the chart
should be tapped gently on a table or bench. This proc-
ess removes dust from the chart perforations, which
might otherwise build up and eventually clog the cassette
mechanism.
OPENING THE CASSETTE
As shown in figures 3.2.3 b and c, access to the chart loading area is by opening the Door Moulding (figure
3.3.2b) then pulling the plastic Paper Guide Assembly away from the roller, allowing the metal Cover Assembly
to be hinged out (figure 3.2.3c).
Figure 3.2.3b Opening the cassette
Figure 3.2.3c
Opening the paper guide and cover assembly
