HA243821
Issue 5 Mar 98
Annex A
Page A - 15
MODEL 346 INSTALLATION AND OPERATION MANUAL
A6.0 RELAY CONFIGURATION
Figure A6.0 Relay configuration menu
DISPLAY
SCROLLABLE VALUES
DESCRIPTION OF PARAMETER OR FUNCTION
Type
Off
Output relay inoperative (always energised).
Act eq Output
Output relay state depends on action equation (below).
Tot. Retrans.
Output relay operates momentarily every N counts of a totaliser (se-
lected in 'Source' below), where N is set up as a part of the totaliser's
configuration. Refer to section 5.2 of this manual for further details.
The up and down arrow keys, followed by Enter, are used to select
relay type.
Act Eq
CI1 to CI6, TT1 to TT6, A11 to A94 The up, down and side arrow keys are used to scroll through the avail-
GLA, KEY, INA, LOG, TM1 to TM4 able triggers for operating 'Act Eq Output' relay types. See section 3.4
of the manual for full details. Once the action equation entries have
been made, the Enter key is used once to confirm them, and the Clear
key used to return to the menu.
Source
Tot. 1 to Tot. 6
Operation of the up or down arrow key allows a totaliser to be selected
for 'Tot. Retrans.' type relays.
Table A6.0 Relay configuration parameters
Select relay
type
Select relay to
be configured
Enter source or
action eqn.
Main menu item
