Section 6
Page 6 - 4
MODEL 346 INSTALLATION AND OPERATION MANUAL
HA243821
Issue 5 Mar 98
6.2 INSTRUMENT ALARMS (Cont.)
7.
History Prog. The configuration of the trace history function is checked. See section 5.4 for history
configuration information.
8.
Misc. Prog. Not used.
9.
Channel Adj. X Each channel (X) is checked for loss of channel adjust settings. See Section 4.8 for
channel adjust configuration information.
10.
Channel Desc. X. Each channel (X) is checked for loss of the channel descriptor. See section 4.8 for
channel descriptor configuration information.
11.
Alarm Prog. XX. Each alarm (1-1 to 6-4) is checked for loss of configuration data. See section 4.10 for
Alarm configuration
12.
Custom Msg. XX. Each custom message (XX) is checked for any change in text. See section 5.3 for
custom message information.
13.
Alarm Msg. XX. Each alarm message (1-1 to 6-4) is checked for any change in text. See section 4.10
for alarm configuration information.
14.
Custom Curve. All data for the custom curve is checked. See instrument menu (section 4.9) for custom
curve configuration information.
15.
Relay Prog. XX. Each relay (XX) configuration is checked. See section 5.1 for relay configuration infor-
mation.
16.
D V Prog. X. Each derived variable (DV X) is checked. See section 5.6 for Derived Variable configura-
tion information.
17.
Totaliser X. Each totaliser (X) is checked for configuration data changes. See section 5.2 for totaliser
configuration information.
18.
Timer X. Both timers are checked. See section 4.12 for timer configuration information.
19.
Custom Msg. XX. Each custom message (XX) is checked for any change in text. See section 5.4 for
custom message review information.
20.
Alarm Msg. XX. Each alarm message (1-1 to 6-4) is checked for any change in text. See section 4.10
for alarm configuration information.
21.
Custom Curve. All data for the custom curve is checked. See instrument menu (Section 4.9) for custom
curve configuration information.
22.
Relay Prog. XX. Each relay (X) configuration is checked. See section 5.1 for relay configuration infor-
mation.
23.
D V Prog. X. Each derived variable (DV X) is checked. See section 5.6 for derived variable configura-
tion information.
24.
Totaliser X. Each totaliser (X) is checked for configuration data changes. See section 5.2 for totaliser
configuration information.
25.
Timer X. Both timers are checked. See section 4.12 for timer configuration information.
Note...
Review all ‘Lost’ displays using the page key only. A double operation of the ENTER key with any of these
displays present turns off the ‘Lost’ displays and confirms to the recorder that all present configuration and
calibration data is acceptable for use.
