Section 5
Page 5 - 46
HA243821
Issue 5 Mar 98
MODEL 346 INSTALLATION AND OPERATION MANUAL
5.7.7 CHARACTER SET
Two sets of characters are available for use with the communications link, as shown in tables 5.7.7a and 5.7.7b
below. The characters in table 5.7.7a can generally be sent direct form the keyboard, or alternatively, by using
the <ESC> key, followed by the hex value of the character as shown in the table.
The characters in table 5.7.7b can only be transmitted to the recorder using the <ESC> key followed by the hex
value of the character as shown in the table. For example, to send a degree symbol, the keys <ESC><B><C>
must be used.
Note...
The # symbol may not be sent directly from the keyboard. If required, it must be sent as <ESC><2><3>
Characters are transmitted by the recorder as ASCII codes 00 to 7F and escape sequences <ESC>80 to <ESC>DF
Table 5.7.7a Character set 1
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
2
3
4
5
6
7
MSB of character code
LSB of character code
