- 6 -
4 Safety notes
M e d i z i n i s c h e
L a b o r d i a g n o s t i k a
A G
EUROIMMUN
4 Safety
notes
4.1 General
Heed all warnings and follow all instructions listed on the instrument and in
the operating manual.
The instrument should only be used by trained personnel.
It is very strongly recommended that all first-time users familiarise themselves
with the manual before using the instrument.
The instrument should only be used according to its intended use.
Only the consumables and accessories (e.g. dilution plates etc., see Chapter 11)
described in the manual should be used. The manufacturer is not liable for
damages which result through negligence or improper operation of the
instrument.
The user should perform exclusively the service described in the
corresponding chapter.
Only parts approved by the manufacturer may be used for procedures carried out
on the device.
The tests and service prescribed by the manufacturer should be performed to
ensure the safety of the user and the proper function of the instrument.
Procedures and service to the instrument listed in this manual may only be
performed by trained, qualified and authorised service personnel.
The system was developed and tested according to the provisions of the
IVD directive.
Unauthorised procedures invalidate all claims against the warranty. Unauthorised
procedures performed on the instrument result in the invalidity of the
manufacturer’s conformity statement. In this case, the responsibility to meet the
applicable regulations lies solely with the customer.
The instrument should only be opened, serviced and repaired by trained,
qualified and authorised personnel.
E
LECTRICAL SAFETY
Applicable laws must be followed for the safe electrical operation of the
instrument.
The Sprinter XL may only be operated with the voltage source which is noted on
the nameplate. If you are unsure whether the voltage is suitable, please contact
an authorised seller or your local energy utility.
A 3-pin cable must be used to connect the instrument to the mains network.
Only use an extension cable with a protective conductor and an earth connection.
You must ensure that the system and its peripheral devices are equally earthed.
Earth contacts may never be interrupted.
If the protective conductor inside or outside of the instrument is interrupted or the
connection is broken, there is a risk of an electrical shock.
