11
Connect the 30 pin connector to the 30 pin port. The connector has 2 slots on one
side which must be aligned with the 2 ridges on the port.
The 30 pin connector will have 2 additional connectors (both 2 pins) which must
be connected to the J12 and J13 ports. Both connector types are different, which
can be used identify whether the cabling should use the J12 or J13 port. Find the
board ports labeled J12 and J13.One side of the board has a J13 port and the other
side has a J12 port.
Summary of Contents for EV6250A Series
