29
Connect the safety catch wire from the dome house to the hook PTZ camera. Also
connect the camera’s 6-pin connector to the dome housing.
Insert the camera into the dome housing, turn the camera in the direction of
“CLOSE” label to lock the camera into the dome housing.
Remove the lens cover.
Affix the plastic dome cover on to the bottom on the dome housing, and remove
the protective plastic covering.
Summary of Contents for EV6250A Series
