About This Guide
Model
•
EV6250A-[B, C, D] – e.g. EV6250A-CI
•
EV6250A-[E, F, G] – e.g. EV6250A-GO
Purpose
The Assembly Guide provides instructions on the physical assembly and installation
for the EV6250A indoor and outdoor models.
Before Using the EV6250A
Check the PC requirements
Review the OS platform requirements
Read an special and import precautionary information
Having basic knowledge of network setup and configuration will be helpful
Disclaimer
© 2011 Etrovision Technology. All rights reserved.
Information contained in this document may be superseded by updates. No
representation or warranty is given and no liability is assumed by Etrovision
Technology with respect to the accuracy or use of the information, or infringement of
patents or other intellectual property rights. No licenses are conveyed, implicitly or
otherwise, under any intellectual property rights.
Summary of Contents for EV6250A Series
