General Information
Instruction Manual ATS 400 with SC-NG
Version 4.03
8
Furthermore the Interfaces make permanent collection of data and the download of
sets of test parameters as well as the control of operating parameters possible. On
the PC the data management software
ETL DataView
is available to telecommand
the test device; or you use DLL- or LabVIEW drivers for a comfortable connection of
your application.
3.3
Model and Type Designation
Automatic Test System ATS 400
3.4
Validation
This document is valid für all products of the Series 400. This series of products
forms the platform for many types and operation types.
You can find the description of the test modules in the „Technical Description“.
The operation types X2, X4, X5, X6 and X8 can be selected freely and combined with
every test configuration.
You can find the number of the product on the type label. The type label is affixed at
the back side of the test system.
Technical changes without prior announcement are reserved.
3.5
Handling according to Regulations
DANGER
Handling according to the regulations has to be taken care of!!
Please regard chapter 2.1 Safety Information.
3.6
Maintenance work
To check the safety circuit, regular maintenance work is necessary depending on the
configuration used.
These are described in the chapters on the safety circuit.
For variants X4, X5, X6 and X8, backups of the configuration, test plans and result
files must be performed regularly or if required.
3.7
Scope of Delivery
Please check the delivery for completeness. Thereby mind possibly smaller packages
as well.
The following parts must be included:
1 power cable
1 instruction manual
1 safety circuit plug
1 plug for the warning lamps
1 Quick start manual for
ETL DataView
3 (not for type X2)
Please check the delivery for possible transport damage.
