Technical Data
Instruction Manual ATS 400 with SC-NG
Version 4.03
58
12
Technical Data
12.1
General Technical Data
General
Power connection:
230 V, 50 Hz / 60 Hz
Power consumption:
Max. 10 A, depending on the type up to
16 A
Display:
Type X2: without Display
Type X4: TFT-Display with Touch
5,7 inches, 640 x 480
Type X5: TFT-Display with Touch
10,4 inches, 800 x 600
Type X6: without Display, with VGA-
connection
Type X8: TFT-Display with Touch
10,4 inches, 800 x 600
Setting the test parameters:
Manually or fully automatically via
interface
Programming:
Via display or external control
Error signal:
Acoustically, optically or via interface
Dimensions (W x H x D):
410 x 210 x 435 mm
Weight:
From ca. 18 – 35 kg
Casing:
Metal, light grey
Temperature range:
5 - 45 °C
Basic equipment:
Instruction manual, main cable, safety
circuit plug
Calibration:
Factory calibration certificate inclusive
Interfaces
ETL Interface, digital:
Start, stop, result good / error and test
in process, etc.
Optional:
USER Interface, digital:
Freely configurable IOs
Optional:
ADF Interface:
Analogue IOs and frequency inputs
Remote control interface RS232:
For the connection to the PC and for
direct connection to a terminal
programme or a log printer
CAN:
For the expansion of the test system,
for additional features und further
expansion stages
Connections
High voltage outputs:
The contacting of the test object is
executed via 2 potential-free high
voltage outputs, each double-pole with
connection jack for an HVP06C plug.
PE Test probe:
Connection for contacting the test
objects via a test probe with start push
button and result-LEDs.
Safety circuit:
For the implementation of the suitable
safety circuit according to EN 50191
Warning light connection:
For the connection of a warning light
combination according to EN 50191
