58
www.eta.co.at
Subject to change due to technical improvements
Opening the touch screen
Remote Control
(see page 57).
Safety notice
Before the touch screen is displayed, a safety notice
appears. This notice must be observed in order to
ensure safe operation of the heating system.
Confi rm that you have read and understood the
safety notice by pressing [I understand]. The touch
screen will then appear. The display is the same as
the current display on the boiler.
You can now control the boiler remotely, exactly as
if you were standing in front of it.
For safety reasons, some functions and parameters
cannot be changed via remote control
(see page 15).
Errors and warnings may NOT be rectifi ed
via <www.meinETA.at>
Any errors or warnings that are displayed can
and may only be rectifi ed on site, i.e. directly
via the boiler.
Rectifying an error using the remote control is not
permitted. This is because doing so could injure
anyone who is working on the boiler to rectify the
error.
In particular, you should avoid switching
the boiler on via remote control if an error
message is present.
Logging on at <www.meinETA.at>
Open the homepage <www.meinETA.at> and
enter your login data. Press the [Login] button to
log in.
Once you have logged in successfully, the user
menu will appear.
Tap the [ETAtouch devices] button.
Opening the touch screen
The [Currently connected ETAtouch devices]
window shows the currently available touch
screens.
Press the
button
to view the corresponding
touch screen
.
In the [Registered ETAtouch devices] window, you
can use the
button
to change
the
data
for
each registered touch screen.
Using remote control
Opening the touch screen
Opening the touch screen