22
3.1.3 Constant Resistance Mode (CR)
In constant resistance mode, the E-load will behave as a fixed resistance value. As shown
in the figure below, the E-load changes the current linearly as the input voltage changes.
Figure 3.3 CR mode
In CR mode, the E-load provides two methods to set the constant resistance value.
1) In CR mode, use the numeric keys to input the resistance value, press the key
to confirm the setup constant resistance value, and press the key
to on/off the
loading test.
2) Press the key
to move the cursor position and press the key
to adjust the
value at the corresponding position.
ET System electronic GmbH