Hardware Mounting
46
We.R System
Symptom
Symptom
5.
The siren tamper mechanism has been inadvertently
triggered, check if the battery casing is closed correctly
6.
Check, via the web application, for a tamper icon near
the device graphic
D.5
Key Fob
Symptom
Symptom
The Key Fob does not
work (no LED
indications)
Check for the following:
1.
An event entry on the right side of the web application
states a low battery status for the Key Fob device,
replace the battery as needed (Lithium battery only)
2.
Verify that the battery is inserted incorrectly (“+” side
up)
3.
Check for any damage to the Key Fob
The Status LED flashes
after pressing one of
the other buttons
This is a normal operation. It indicates to the Key Fob
owner that the device battery is low. This battery status
can be confirmed at the monitoring station by looking at
the low battery event entry on the right side of the web
application; replace the battery (Lithium battery only)
All the LEDs are
flashing
This may not be an issue, check the history events. If
the alarm has been triggered, a break-in is in progress
While pressing SOS
the LEDs flash one
time
Check if the Key Fob has lost its connection with the
Control Panel via the web application. The Key Fob may
be out of range or experiencing RF interference
When pressing the
Status button, the LED
flashes once and the
other LEDs do not
flash
1.
The Key Fob may not have been added/learned by the
We.R system. Refer to the We.R user manual for
information about adding a Key Fob to the system
2.
The Key Fob may be out of range. Move closer to the
Control Panel and try again
3.
RF interference may be blocking the signal. Move to a
different location (within range) and try again
Arming system fails
via Key Fob
Check if one of the system device’s tamper mechanisms
has been triggered
