The Alarm Management (Web/Mobile)
We.R System
23
7
The Alarm Management (Web/Mobile)
The following subsections provide a side-by-side comparison of the We.R system
Alarm Management bar (web application) and the Main Status screen (Mobile
application). These displays show a text and graphic representation of the current
status of your system, and include command buttons that allow you to change the
status.
7.1
Arm
1.
When the system is disarmed, you can arm it by pressing one of the Arm
buttons:
Full Arm
: The system protects all zones. This will arm all of the
monitoring devices on the premises and an alarm will be triggered by
any detection.
Day Arm
: The system protects and monitors designated hazardous
zones. This scenario is used mostly for childcare and safety, allowing
you to monitor and protect zones like medicine cabinet, swimming
pools, basements, etc.
Night Arm
: The system protects designated area on the premises
from intruders. This scenario can arm, for example, only the front
door, back door and balcony.
Figure 20: Web and Mobile Arming Buttons
2.
After the arming process is completed, the system status will be changed.
7.2
Force Arm
When arming the system, where one or more of the devices may be open (in case
of monitored window/door), you will be notified about these devices and the
system will allow you to perform a force arm. In this scenario, the opened device
is bypassed.
7.3
Disarm
1.
After the system is armed, disarm it by clicking the Disarm button.
