Hardware Mounting
We.R System
29
Appendix A
Power Up Devices (Peripherals)
The following sub section should be referred to when adding devices to your
system or replacing batteries in a device that is already part of your system.
A.1
Motion Detector (PIR)
An IPD functions as an image capturing device and motion detector.
1.
Remove the mounting base and battery cover from the IPD.
2.
Insert 2 AA batteries. For the next 10 minutes, the red light in the IPD
may glow periodically as the device conducts a series of tests.
3.
Replace the battery cover and mounting base.
Figure 25: Mobile Motion Detector (PIR) Diagram
A.2
Indoor Photo Detector(IPD)
1.
Remove mounting base and battery cover from the Motion Detector, see
Figure 26 and Figure 27.
2.
Insert 3 AA batteries. For the next 10 minutes, the red light in the Motion
Detector may glow periodically as the device conducts a series of tests.
3.
Replace the mounting base.
