PROGRAMMING 65
¾
Lift the handset.
¾
Press 67.
¾
Enter
- 0 if the system is connected to a switchboard extension
- 1 if it is connected to the PSTN line.
Note: When the system is connected to a switchboard, the external
line seize code of the switchboard must be dialled before the
programmed number.
Automatic answer
Installer
Operator
9
The device can automatically answer the incoming calls over the external line.
You can programme the device by remote with a DTMF telephone, open a door
or establish a handsfree conversation with the handsfree terminals.
Activation
(number of call rings)
¾
Lift the handset.
¾
Press 64.
¾
Enter the number of rings (from 0
to 9) before the alarm system
engages the line to answer the call (automatic answer). “0” sets the
number of rings at 10. The factory default setting is
1.
Connection Time after the Automatic Answer
You can set the maximum connection time after the automatic answer. When
the time has almost expired, the system sends a warning tone to the external
user. The user has a few seconds to enter any digit and extend the connection
by the programmed time value. By factory default it is set at 1 minute.
