PROGRAMMING 35
From a remote telephone
The Automatic Answer function must be active. The function is active by
default.
ACCESS TO PROGRAMMING
¾
Call HelpyL300. It automatically answers the call (after the programmed
rings; 1 ring by factory default)) and you will listen to the elevator
identification message (recorded during installation), followed by the
dialling tone.
¾
Dial, within 1 minute,
<INSTALLER OR OPERATOR PASSWORD>
(by default:
).
¾
Programme the device.
If the entered code is correct you receive the confirmation tone (3 short tones),
whilst if it is incorrect you receive the error tone (longer continous tones); in
this case you do not need to hang up to continue. The device generates a
warning tone before the maximum conversation time after the automatic
answer has elapsed (see section “Automatic Answer”). Press any key within 10
seconds to reset the maximum conversation time.
EXITING THE PROGRAMMING MODE
Simply hang up to exit the programming mode.
