PROGRAMMING 61
¾
Enter the “Handsfree activation” code. If the code’s length is less than 3
digits dial #.
“END” CODE UPON ALARM
It is the code entered by the called remote user to abort the alarms. By factory
default it is set at 9.
Installer
Operator
9
…
(from 1 to 3 digits)
[
]
¾
Lift the handset.
¾
Press 43.
¾
Enter the “End” code. If the code’s length is less than 3 digits dial #.
Note: For the emergency call alarm, it is possible to end the alarm
only after entering the “Exclusion” code (1 by default).
“EXCLUSION” CODE UPON ALARM
It’s the code that must be dialled by the called user in order to:
•
exclude his number from the next alarm call cycles in case of technological
alarms, diagnostics, automatic test call;
•
Suspend the emergency call alarm .
It is set at 1 by factory default.
Installer
Operator
9
…
(from 1 to 3 digits)
[
]
¾
Lift the handset.
¾
Press 44.
