38 PROGRAMMING
¾
Lift the handset.
¾
Press 21.
¾
Enter the position of the telephone number within the table of 12 available
numbers, from 01 to 12.
¾
Enter the type of source, that is to say the event associated with the
number:
1
Emergency call button;
2
Technological alarm and diagnostics alarm;
3
Automatic test alarm
4 Vacant;
5 Exhausting SIM credit alarm.
¾
Enter the figure related to the type of RECEIVER , corresponding to the
specific telephone number:
1 Call Center working under Ademco Contact ID protocol;
2 standard telephone user (manual management of the alarm call);
3 Call Center working under Esse-ti protocol (He Call software);
4 Call Center working under CLI mode;
5 SMS.
¾
Enter the telephone number (max. 20 digits).
¾
Press #.
Note: to enter one or more 2-sec pauses during dialling press
once or repeatedly.
To enter more telephone numbers repeat the assigned code; numbers are called
according to the introduction position.
To delete a telephone number enter directly
after the RECEIVER.
Example:
POS.
SOURCE
RECEIVER
NUMBER
01
EMERGENCY CALL=
1
STANDARD TEL USER =
2
0718754213
02
EMERGENCY CALL=
1
CALL CENTER ESSE-TI =
3
071986532
03
TECHN. ALARM. =
2
CALL CENTER ADEMCO =
1
071863265
04
EXPIRING CREDIT.=
5
SMS =
5
3331234567
Dial:
for the first number
