58 PROGRAMMING
Note: if you programme the emergency call buttons as normally
closed you must connect the Alarm inputs not used to a
negative pole (for ex. VV1- or VV2-).
Delay for emergency call buttons
Installer
Operator
9
You can programme the minimum number of seconds for which the emergency
call button must be pressed in order to activate the alarm (2 sec. by factory
default)
(seconds)
¾
Lift the handset.
¾
Press 42.
¾
Enter the value corresponding to the desired delay time (from
2
to 9
seconds).
Filter activation
Installer
Operator
9
9
The filter is used to avoid sending the alarm (from emergency button 1, in the
car) in the following cases:
•
The car is at the floor and all doors are open
•
The car is moving and the doors will open at the next floor.
•
The filter must be deactivated during maintenance.
The filter has no effect on buttons 2 and 3, if present.
(setting)
¾
Lift the handset.
¾
Press 53.
0
to disabile the filter
1 to enable the filter.
