36 PROGRAMMING
BASIC
PROGRAMMING
•
Select the type of telephone line (PSTN line or GSM line bymeans of
GSM200 module)
•
Date and time
•
Telephone numbers, in association with the type of alarm and recipient
•
Dead battery alarm activation
•
Automatic test activation
•
Identification message recording
•
Type of installation if handsfree terminals are connected to VV2 or
VV3
•
Protocols identification code (for use with Call Centers with Ademco
Contact ID or Esse-ti protocols). The device Id number must be
generated by the Call center itself.
•
Volume setting with reference to handsfree terminals and messages.
Programming the type of telephone line
Installer
Operator
9
9
It allows to programme the type of external line:
•
PSTN line
•
GSM200 Module.
WARNING
This programming must always be done at
installation.
WARNING
Please check that jumpers JP11 and JP12 are in
placed in the correct position (see “Connecting the
telephone line” on page 25)
