64 PROGRAMMING
-
1
for DTMF dialling.
Call cycles
Installer
Operator
9
It permits to programme the number of call cycles made by the device in case
of :
-
technological alarms,
-
diagnostic alarms
-
expiring SIM credit alarms
-
automatic test calls.
By factory default the number of call cycles is set at 5. The number of call
cycles is always indefinite for emergency call alarms.
(cycles)
¾
Lift the handset.
¾
Press 62.
¾
Enter the number of alarm call cycles (from 0 to 9). “0” indicates 10 call
cycles.
Example: To set the call cycles at 5 dial:
.
Connection to switchboard or PSTN line
Installer
Operator
9
It allows to indicate whether the device is connected to a PABX or directly to
the fixed line (as per factory default setting). This setting is required for the
device to encode correctly the tones coming from the external line connector
LTI.
(setting)
