54 PROGRAMMING
¾
Press 54.
¾
Enter:
-
0
to deactivate the diagnostics alarm
-
1 to activate the diagnostics alarm
Note: the diagnostic procedure is performed every day at the same
time set for the automatic test call.
Note: when the diagnostic alarm is enabled, the device always
performs the diagnostic procedure upon switching on.
Expiring credit alarm
Installer
Operator
9
9
It allows to activate the check procedure on the SIM card remaining credit and
its related alarm, in case the Hepy L300 is connected with a GSM200 module.
The check is performed at the end of each outgoing call, the value acquired is
compared with the minimum value previously set; in case the acquired credit is
lower, the corresponding alarm is generated.
WARNING
The remaining credit request can only be enabled
on pre-paid SIM cards (no contracts accepted)
from the following providers: Tim, Vodafone Italy
and Wind.
Activating the expiring SIM credit alarm
(setting)
¾
Lift the handset.
¾
Press 240.
