Connector Assignment
Hardware Manual • Doc. No.: V.1915.23/ Rev. 1.0
VME-PMC-CADDY/2plus
Page 38 of 47
7.2 Ethernet Interface (V.1915.05, V.1915.06 only)
The connector is not equipped in the VME-PMC-CADDY/2-CC version.
The Ethernet interfaces are equipped with 8-pin RJ45-sockets (8P8C) according to TIA-568A/B
Pin Position:
Cut-out for
fastening lever
Pin Assignment:
Pin
Signal
1
MDI0+
(TP0+)
2
MDI0-
(TP0-)
3
MDI1+
( TP1+)
4
MDI2+
(TP2+)
5
MDI2-
(TP2-)
6
MDI1-
(TP1-)
7
MDI3+
(TP3+)
8
MDI3-
(TP3-)
S
Shield
8-pin RJ45-socket
Signal Description:
MDIx+, MDIx- ...
Ethernet data lines (x = 0 - 3)
Shield...
case shield, connected with the front panel of the VME-PMC-CADDY/2plus
Note:
Cables of category CAT5e or higher have to be used to grant the function in networks
with 1000 Mbit/s.
