Configuration
VME-PMC-CADDY/2plus
Hardware-Manual • Doc.-No.: V.1915.23 / Rev. 1.0
Page 21 of 47
Figure 6: Coding switch and connector position bottom layer VME-PMC-CADDY/2plus
In the default version of the VME-PMC-CADDY/2plus and VME-CADDY/2plus-T the SMD resistors
RX130-RX135 are not equipped.
See chapter “General technical Data” on page 15 for information about the power supply voltages.
In the default version of the VME-PMC-CADDY/2-CC the SMD resistors RX130-RX135 are
equipped instead of the resistors RX2530-RX2535.
Note:
In the VME-PMC-CADDY/2-CC version the Ethernet ports 1 and 2 and the serial
interface connector X1940 are not equipped.
The signals of the serial interface are available via P0.
