Configuration
Hardware Manual • Doc. No.: V.1915.23/ Rev. 1.0
VME-PMC-CADDY/2plus
Page 26 of 47
3.3 PMC Slot Configuration (SW800)
Figure 8: Coding switch SW800 (default setting)
The position of the coding switch on the VME-PMC-CADDY/2plus can be taken from figure 6.
Coding switch-
contact
Name
Description
Default
1
P-PUPEN
reserved for future applications;
always set to “OFF”
OFF
2
P-M66EN
Clock rate of the PCI-Bus of the PMC
modules:
OFF: 66 MHz
ON:
33 MHz
ON
3
P-MONARCH 2#
Monarch/Non-Monarch PMC module 2
OFF: Non-Monarch
ON:
Monarch
OFF
4
P-MONARCH 1#
Monarch/Non-Monarch PMC module 1
OFF: Non-Monarch
ON:
Monarch
OFF
Table 10: PMC slot configuration via SW800
