Bootloader
VME-PMC-CADDY/2plus
Hardware-Manual • Doc.-No.: V.1915.23 / Rev. 1.0
Page 33 of 47
6.5 Booting Linux
Here is an example for step-by-step instructions for booting Linux at the serial console. The tftp
command requires a correct U-Boot network configuration. That means the bootloader environment
variables
and
must be set up according to your network.
When any of the following steps fail, do not proceed!
The first three steps are only for VME-PMC-CPU/2 modules. For VME-PMC-CADDY/2plus modules
start with step 4!
(
1. Load :
!"#$% !
&
2. Initialise the NAND:
' '!()*+'+,
3. Start the USB:
"-.
-, ),
)
4. Set the server IP:
-*,*'/
-*)/*)+0
1&2&213245
5. Set the IP address:
-*,*'/
+0 !!)
1&2&2132146
6. Set the gateway IP:
-*,*'/
7 ,*9 :+0
1&2&2&254
7. Set the net mask:
-*,*'/
'*,; -<
6==26==2&2&
8. Set the hostname:
-*,*'/
>%-,' ;*
# !!:60$"-
9. Set the name of the default network interface:
-*,*'/
'*,!*/
*,>&
10. Set the path (which is mounted per NFS) of the Linux file system:
-*,*'/
)%%,0 ,>
?,@,0.%%,?# !!:60$"-?)%%,@-
