![background image](http://html1.mh-extra.com/html/esco/dr-203/dr-203_manual_2426117013.webp)
Addition/removal and configuration of sensors
(see section 10.5)
Operation mode of the recorder.
Recording interval(frequency of data saving).
Setting range: 00:01...23:59 min:hour.
Constant:
Delivery:
records data continuously
recording is signalled with icon
recording the time of load/unload
by pressing button
after the load start, drive is signalled
with icon
If you want the sensors to save data
themselves after turning off the
recorder: see section "AutoOFF"
There are two operation modes:
records data only during the delivery
delivery and recording process
starts/ends manually by pressing
button for 3 seconds
delivery and data recording signalled
with icons and
AutoOFF=YES after turning off the recorder, the
sensors go into sleep mode and they do not save the
data.
AutoOFF=NO after turning off the recorder, the
sensors are still saving data in their cache memory.
Sensors cache memory can hold 1000 measurements.
When cache memory is full, sensor overwrites the oldest
data with the newest measurements
.
After turning on the recorder and restoring the
communication, the sensors send overdue data to the
recorder.
In both operation modes data is saved in a memory with a capacity of 125,000
measurements. If memory is full recorder overwrites the oldest measurements.
Sensors have their own memory with a capacity of 1000 measurements. If they
lose radio communication with a recorder they save data in their own cache
memory (in a loop). After the connection is restored they send overdue data to the
recorder.
13