![background image](http://html1.mh-extra.com/html/esco/dr-203/dr-203_manual_2426117019.webp)
Delivery report.
If you are using a delivery option (paragraph 12), you can print a last delivery report, without a
need of entering a specific date and time.
Printing window will apeear (as on the left).
Choose option:
and press
Recorder will start printing and display a message:
Recorder will start printing and display a message:
If the delivery is still in progress ( backlited), a report from the moment of load to the moment of printout
report will be printed After completing the delivery a report from the load to the unload will be printed.
If the message no data appears, this means there is no data of the delivery in the memory. To cancel
the printing press OK.
Historical report
In this option recorder is printing data from a given time.
Printing window will appear (as on the left)
Choose option: Historical report and press OK.
If the message no data appears, this means there is no data of the chosen time in the memory. To cancel
the printing press OK..
Measurement data is saved at a fixed interval, and events such as loading / unloading, temperature alarm
and door opening are saved as additional cells in memory. Overdue data from sensors, after regaining
lost
communication, are added to the recorder's memory. Therefore, when printing, it happens that in one
minute several events may occur and the sensor error is overwritten with the correct measurement, with
the same time, because it was later downloaded from the sensor's cache memory after recovering the
Set start date using
buttons and
press
Set end date using
buttons and
press
Set end time using
buttons and
press
Set start time using
buttons and
press
To print a last delivery report press .
To print a historical report press .
19