DR203 temperature recorder
wireless sensor with builtin temperature probe and the possibility of connecting a second
temperature probe on the cable and a door opening sensor
instruction manual /warranty card
thermal paper roll (width 57 mm, diameter 30 mm)
universal car charger for 12V/24V cigarette lighter
car holder for mounting the recorder in the cabin
Please read the instruction manual carefully before installation.
Any damage caused by not following these instructions causes the warranty/guarantee
to be lost! In the event of any material losses, the manufacturer bears no responsibility!
In the case of damage to property caused by improper use of the device, the
manufacturer bears no responsibility!
Dear customer, the following safety rules apply to health protection describe the correct use of
the product and instructions for use.
®
For safety reasons, rebuilding or modification of the product isnt allowed
®
Repairs may only be carried out by the manufacturer or specialized workshops
®
The recorder and charger can be operated only in dry interiors. The devices can not be
dampened or wet. Otherwise there is a risk of failure
®
Dont use the charger unattended. Despite the builtin safety system, problems can not be
ruled out when charging the battery
®
When the device isnt used for a long time, remove the battery from the recorder and
disconnect the charger from the power source. Then store the battery and charger in a
clean and dry place. Please remember that the car charger draws energy even when there
is no device connected to it. When not in use, disconnect it to avoid discharging the battery
®
A lithiumion battery was used to power the recorder. The battery can not be dampened or
wet. Protect the battery from heat and direct sunlight. Do not short circuit the battery
electrically or throw it in a fire. There is a danger of explosion and fire!
®
Charge the batteries at least once every 3 months. Otherwise, the battery life will be
shortened
®
The 3.6V lithiumthylium battery was used to power the sensor. Do not short circuit the
battery electrically or throw it in a fire. There is a danger of explosion and fire!
®
Always insert the battery in accordance with the polarity (plus/+ and minus/) given on the
battery and sensor board
®
The recorder is maintenancefree, never dismantle it yourself (except when
inserting/removing the battery during storage)
®
Use soft, clean and dry material for cleaning
®
Data security: before any changes to the configuration of parameters in the service menu,
you must back up the data to an external portable data memory. The manufacturer isnt
responsible for data loss, caused by incorrect settings or improper use. The producer also
doesnt accept claims regarding data loss or consequential damages of the device
®
The recorder should work in conditions of ambient temperature in the range from 20°C to
50°C and relative humidity in the range from 10% to 90%
®
The holder with the recorder can be mounted on the windshield only when it does not
cover the driver's view. When mounting the holder, choose a place so that the handle does
not pose a threat also during a road incident
®
Don't mount the recorder within the range of work of the airbags.
4
