The recorder has been designed for use in the
driver's cab. The kit includes a car holder for
mounting on the front or side window of the car.
When mounting the bracket, select the appropriate
mounting location, following the instructions below:
Dispose of the product at the end of its operation in accordance with applicable legal
regulations. In accordance with European Directive 2002/96/WE and the
Act on Waste
Electrical and Electronic Equipment, this label indicates the ban on the placement of used
electronic equipment together with other household waste. Return the worn device to the
appropriate storage point, or send it to us, because dangerous components in the device
may be a threat to the environment.
Batteries and accumulators containing harmful substances. Used batteries and
accumulators can be taken away free of charge to the appropriate storage point, to us or
wherever batteries and accumulators are sold.
Thanks to this, you meet legal requirements and contribute to the protection of the
environment!
ASSEMBLY:
Press the suction cup (A) in the designated area, to the front or side window of the car, making
sure that the suction cup and glass are clean, without any traces of water or other contaminants.
Then move the locking lever (B) towards the glass.
After mounting the bracket on the glass, unlock the lower support (C) and place the recorder
between the two jaws (D) of the bracket. Then snap the DR203 with the jaws so that it is rigidly
placed and that it does not slide out while driving. Use the two knobs to adjust the viewing angle,
position and direction of the recorder display.
do not cover the driver's field of vision
do not mount the set within the range of the
operation of the airbags
do not attach the set too close or opposite the
head so that it doesn't pose a threat during a
road incident
C
B
D
D
E
A
Turn the knobs so that the handle doesn't unlock and doesn't move while driving. After
some
time of use, retighten the knobs and tighten the clamping jaws and make sure that the recorder
is properly mounted.
At any time, the recorder can be removed from the holder by releasing the (E) unlocking
button.
6
