![background image](http://html1.mh-extra.com/html/esco/dr-203/dr-203_manual_2426117011.webp)
Info button
(UP and more)
1
delivery button (
DOWN and decreasing
)
press 3 sec. to disable/enable registration
(only in the "Delivery" registration mode)
2
menu button (
LEFT and cancel
)
press 3 sec. to turn on/off recorder
3
2
4
1
3
6
12
11
10
9
8
7
5
13
print button (
RIGHT and accept
)
4
the temperature measurement value
5
the temperature sensor number
6
battery voltage level indicator
flashing: the charger is not connected
lights up: charger connected
7
temperature registration started
12
11
10
13
8
Bluetooth communication indicator
blinking: waiting for connection
lights up: connected
Symbol indicates which door
are open
temperature exceeding alarm
9
delivery of goods (the course is on)
current time
temperature unit
After completing the recorder installation, the device must be configured.
The parameters menu is divided into two groups:
basic menu for the driver
advanced menu for the serviceman
press to cancel the changes and to exit one level up in the menu.
While text editing press to move to the editing of previous character.
To start menu configuration press "menu" button. Next using the keyboard buttons, configure the
device following the instructions below:
Press to change the parameter values and to switch between the
parameters in the menu.
Press to start editing parameter or to confirm changes, while text editing move to
editing next character
The basic menu is intended for the driver who will use the device daily. It contains basic settings
necessary for convienient use. This menu is not protected by a password.
11