ERM Neoverse N1 Page 71 Technical Reference Manual Download

Page: 71 / 241

3.6

Command-line interface

The N1 SDP command

‑

line interface supports system command-line input to the

Motherboard

Configuration Controller

(MCC).

This section contains the following subsections:
•

3.6.1 Overview of the N1 SDP MCC command-line interface

on page 3-71

•

3.6.2 MCC main command menu

on page 3-71

•

3.6.3 MCC debug menu

on page 3-72

•

3.6.4 EEPROM menu

on page 3-72

3.6.1

Overview of the N1 SDP MCC command-line interface

You must connect a workstation to the DBG USB to enter MCC system commands at the MCC USB
port.

You must set the

MBLOG

option in the

config.txt

TRUE

to enter MCC system commands.

The workstation settings must be:
• 115.2kBaud.
• 8N1 representing 8 data bits, no parity, one stop bit.
• No hardware or software flow control.

Related information
1.3 The N1 SDP at a glance

on page 1-14

3.6.2

MCC main command menu

The following table shows the MCC main menu system commands.

Table 3-1 N1 SDP MCC main command menu

Command

Description

CAP

filename

[/A]

Capture serial data to the file

filename

Use the

option to append data to an existing

file.

COPY
input_filename_1

[

input_filename_2

]

output_filename

Copy a file

input_filename_1

output_filename

Option

input_filename_2

merges

input_filename_1

and

input_filename_2

DEBUG

Change to the debug menu.

DEL

filename

Delete file

filename

DIR

[

mask

]

Display a list of files in the directory.

EEPROM

Change to the EEPROM menu.

FILL

filename

[

nnnn

]

Create a file

filename

filled with text.

nnnn

specifies the number of lines to create.

The default is 1000.

HELP

Display this help.

REBOOT

Cycle system power and reboot.

REN

filename_1

filename_2

Rename a file from

filename_1

filename_2

3 Configuration

3.6 Command-line interface

101489_0000_02_en

reserved.

3-71

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands