ERM Neoverse N1 Technical Reference Manual Download Page 170

Page: 170 / 241

Table 4-91 BOOT_GPR7 Register bit assignments

Bits

Name

Type

Function

[31:0]

REG

RO from APB interface.

RW from serial interface.

Bootup general-purpose register 7.

Reset value

0x00000000

4.5.61

INSTANCE_ID Register

The INSTANCE_ID Register characteristics are:

Purpose

SWJ-DP instance ID register.

Usage constraints

This register is read-only from the APB interface and read/write from the serial interface.

Configurations

Available in all N1 board configurations.

Memory offset and full register reset value

See

4.5.1 Serial Configuration Control registers summary

on page 4-120

The following table shows the INSTANCE_ID Register bit assignments.

Table 4-92 INSTANCE_ID Register bit assignments

Bits

Name

Type

Function

[31:4]

Reserved.

[3:0]

RO from APB interface.

RW from serial interface.

SWJ-DP instance ID register.

Reset value

0b0000

4.5.62

PCIE_BOOT_CTRL Register

The PCIE_BOOT_CTRL Register characteristics are:

Purpose

Enables reset of sticky bits in the PCIe and CCIX controllers during reset of the PCIe and CCIX
controllers.

Usage constraints

There are no usage constraints.

Configurations

Available in all N1 board configurations.

Memory offset and full register reset value

See

4.5.1 Serial Configuration Control registers summary

on page 4-120

The following table shows the PCIE_BOOT_CTRL Register bit assignments.

4 Programmers model

4.5 Serial Configuration Control registers

101489_0000_02_en

reserved.

4-170

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands