ERM Neoverse N1 Page 70 Technical Reference Manual Download

Page: 70 / 241

3.5

Use of reset push buttons

The On/Off/Soft reset button, PBON, initiates the powerup and powerdown sequences. The Hardware
reset button, PBRESET, initiates a hardware reset.

In standby state, press the PBON button briefly, less than two seconds, to initiate the powerup sequence.

In the operating state, press the PBON button for longer than two seconds to initiate the powerdown
sequence.

In the operating state, press the PBRESET button to initiate a hardware reset.

See

3.2 Powerup and powerdown sequences

on page 3-62

Related information
1.3 The N1 SDP at a glance

on page 1-14

3 Configuration

3.5 Use of reset push buttons

101489_0000_02_en

reserved.

3-70

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands