LBI-39190
15
Sample SYSTEM.TXT File with commands under [system] heading
In the following SYSTEM.TXT there are several commands under the [system] heading. A command under this
heading is used to set up global system parameters. In this example the msg_timeout command has a value 100. A
message can be queued in Data Advantage for as long as 100 seconds before being sent out to the RDT. The
edacs_err_retries command has two parameters. The first parameter specifies the number of retries in case of
error when sending message to a RDT. The second parameter specifies the amount of time (in tenths of a second)
that Data Advantage should wait after receiving an error indication from an RF control station before attempting
a retry.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/DACAP.SX
[board 2]
type wni
[ip]
cap_ext_address 1.0.15.14
[system]
msg_timeout 100
edacs_err_retries 220
[edcas_network]
ip_network_id 128.1.0.0
[device_config_table]
rdt 64 - 16382 128.1.0.64 FALSE
port 0 1.0.15.12
port 1 1.0.15.12
port 2 1.0.15.13
port 3 1.0.15.13