LBI-39190
12
Sample SYSTEM.TXT File with Network Layer RDTs
The following SYSTEM.TXT configuration file matches the example configuration if all RDTs use the network
layer. Since there is no [device_config_table] specified , Data Advantage creates default entries for all LIDs from
64 to 16382. The IP address for the RDT defaults use the network ID of the defined EDACS Network, and the
range of the host IDs is from 0.64 to 63.255. Data Advantage also creates default entries for all GIDs from 1 to
2047, using the same network ID, with the range of the host IDs from 64.0 to 71.255.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/DACAP.SX
[board 2]
type wni
load 01.02/loads/WNI.SX
[ip]
cap_ext_address 1.0.15.14
[edacs_network]
ip_network_id 128.1.0.0
In the above example there is no “port_dir” command specified under the board 2. Data Advantage will default
ports 0 and 1 to be Input ports and ports 2 and 3 to be Output ports. Note that if the [device_config_table] is not
specified, the Data Advantage will default all RDTs to Network Layer RDTs.