LBI-39190
13
Sample SYSTEM.TXT File with Non-Network Layer RDTs
In the following SYSTEM.TXT, the same IP addresses are assigned to LIDs 64 - 16382, except that all RDTs are
without Network Layer. In addition, there are four port commands that associate ports 0 and 1 to Host A, and
ports 2 and 3 to Host B. All messages received at port 0 would be forwarded to Host A if the originating RDT
does not have the EDACS Network Layer. The Data Advantage Configuration Reference Manual (See Preface)
contains a detailed explanation of each command.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/DACAP.SX
[board 2]
type wni
load 01.02/loads/WNI.SX
port_dir 0 in
port_dir 1 in
port_dir 2 bi
port_dir 3 bi
[ip]
cap_ext_address 1.0.15.14
[edcas_network]
ip_network_id 128.1.0.0
[device_config_table]
rdt 64 - 16382 128.1.0.64 FALSE
port 0 1.0.15.12
port 1 1.0.15.12
port 2 1.0.15.13
port 3 1.0.15.13