START button.
3.
You are now entering training mode. In this mode, press the PLUS and MINUS
buttons to change the gears at any time and thus, to modify the strain. The
change will be displayed for 5 seconds. Furthermore, the gradient can be
displayed by pressing the START button. You can modify the gradient settings
by pressing the PLUS and MINUS buttons. By pushing the START-button one
more time, you will return to the gear selection.
4.
Stop the training by pressing the STOP button. The training parameters remain
on the display. By pushing the STOP-button one more time, you will return to the
main menu. The display will also return to the main menu automatically after 2
minutes if no action is carried out.
If the operational range of the brake is exceeded, an exclamation mark will be displayed
next to the performance display. This indicates that the displayed performance does
not correspond to the performance on the crank handle. Please modify the speed or
the gear to return to the correct performance.
7.1.5
WHO-PROFILES
The WHO profiles are step profiles defined by the World Health Organization (profiles
with stepping strain increase). On CYCLE 407 MED, you can choose between the
predefined profiles WHO1 and WHO2; on CYCLE 457 MED, the user profile can be
set individually
WHO1:
25 W initial strain, increase of 25 W every 2 minutes, recovery strain of 25 W
WHO2:
50 W initial strain, increase of 50 W every 3 minutes, recovery strain of 50 W
Please proceed as follows (CYCLE 407 MED):
1.
Push the PLUS/MINUS buttons until the programme WHO-PROFILES is
selected. Confirm your choice with the START button.
2.
In the submenu, press the PLUS or MINUS button to choose a WHO profile and
confirm this with START.
3.
You are now in the "WHO PROFILE" training mode. Press the STOP button to
stop the strain phase and to proceed to the recovery phase. By pushing the
STOP-button one more time, you will return to the main menu.
Please proceed as follows (CYCLE 457 MED):
Start WHO profile (description with data protocol P01; without the data protocol P01,
the sequence resting ECG nr. 4 as well as the remote start sequence will not apply 10
seconds before strain change).
Operation
Technical and optical modifications as well as misprints reserved -
© 2011
by ERGO-FIT GmbH & Co. KG
3 8
