Transport and set up
Technical and optical modifications as well as misprints reserved -
© 2011
by ERGO-FIT GmbH & Co. KG
5.3
Ambient temperature
⊗
Your ERGO-FIT exercise machine may be used at an ambient temperature of
+10°C to +40°C, a relative humidity of 30 to 70% (non-condensing) and an
atmospheric pressure of 700 hPa to 1060 hPa without causing any problems.
⊗
When switched off, the ERGO-FIT machine may be stored at a temperature
between -30°C to +50°C.
5.4
Power connection
1.
Carry out a visual inspection of the mains connection cable and the connectors
(power input module on CARDIO LINE 400 MED only) before starting the
machine. Damaged power cords and connectors need to be replaced
immediately.
2.
Damaged power cords and connectors need to be replaced immediately. Take
the mains connection cable and plug it into the appropriate power input module
(see figure, CARDIO LINE 400 MED only). Plug the other end of the cable into
the mains socket.
3.
Switch on your exercise machine by pushing the button located on the power
input module (CARDIO LINE 400 MED, I = switch on, O= switch off) or by
pushing the foot actuated switch on the power cord (CARDIO LINE 400).
4.
After your exercise machine has been connected to mains and switched on, it
automatically carries out an operating check. During this operating check, you
will be able to read the software version of the unit on the display. Thereafter the
main menu will appear.
5.
Stand on the side of the control panel (view onto the display) and check if the
Transport and set up
Technical and optical modifications as well as misprints reserved -
© 2011
by ERGO-FIT GmbH & Co. KG
2 0
Power input module
with mains plug