CARDIO LINE 400/400 MED
Technical and optical modifications as well as misprints reserved -
© 2011
by ERGO-FIT GmbH & Co. KG
Danger! Mount the foot caps
first
before laying the cable underneath the foot frame:
Lay the cable
underneath
the foot frame to the rear end of the machine. Make sure
not
to pinch the cable between the casing and the foot frame or between the casing
and the floor!
5.2
Set up and the right place for set-up
⊗
Make sure that the surface underneath the machine is level and horizontal.
⊗
The adjustable feet underneath the machine are designed to compensate for
minor unevenness. Adjust these feet to attain a stable position on the floor and
prevent tilting of the machine.
⊗
Please make sure the distance between each machine is at least one metre, or
you might experience errors of the POLAR heart rate receiver.
⊗
High-frequency and magnetic disturbance signals (e.g. radios, TV sets, mobile
phones etc.) in close proximity to your cardio machine area may also interfere
with the pulse transmission.
⊗
In rare cases, strong electromagnetic fields in some locations may interfere with
the transmission of the heart rate (e.g. high voltage circuit or tramway contact
wires).
⊗
In case of interference or if you suspect there is interference with the heart rate
transmission, do not, under any circumstances, use the machine for a cardio
controlled workout (in CARDIO mode).
Please note that the adjustable feet of the CYCLE are equipped with plastic protection
caps. In exceptional cases (e.g. when using strong cleaning agents), this may leave
marks or stains on the floor.
CORRECT
WRONG
1 9
