EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
28
2.2 ESD Precautions
•
Work in a static-free environment.
•
Wear an earthed wrist strap when handling either the programmer
and/or any programmable device.
•
Ensure that the PC, programmer and Target system are connected to
the same EARTH (0V) potential.
•
Do NOT plug the ISP cable of the programmer into a Target System
when the Target power is ON.
•
The programmer I/O lines are ESD protected, but it always good
practice to take proper ESD precautions. This can help to avoid ESD
damage to either the programmer or Target System.
2.3 Removing the programmer cover
a
Remove programmer from all packaging and
place button-side down on a flat surface
b
Remove all four screws from the back of the
programmer (if fitted)
The screws will be supplied in a separate small
plastic bag if this is a new programmer.
c
Remove programmer cover to reveal internal
electronics
