EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
13
1.5 EPSILON5-MK4 Programmer - Main Features
Wide ranging Device Support capability
•
Supports In-System Programming (ISP) of many popular FLASH Microcontrollers, Serial
EEPROM and serial FLASH Memories
High-speed Programming
•
Optimised algorithms, on-board project data storage and high-speed line-driver circuitry delivers
the fastest possible programming times
Supports most ISP Protocols
•
SPI, JTAG, I2C (2-wire). ATtiny HV SCI
High-speed JTAG port
•
Supports high-speed JTAG programming of Atmel AVR, AT91SAM7, ST STM32 microcontrollers
High-speed SPI port
•
Supports full range of SPI speeds from 10 Hz up to 4 MHz
Fully ESD and Over-voltage protected I/O
•
All Target I/O pins feature both ESD and over-voltage protection
Supports programming at Target Voltages down to 3.0V
•
An optimised driver circuit delivers fast clean programming waveforms from 3.0 to 5.0V.
Excellent Host Control connectivity
•
1 x USB Port (mini-USB connector)
Standalone Operation
•
Programmer can operate in
‘Standalone Mode’
i.e. without PC Control.
•
Programmer can be controlled via 2-button Keypad.
Supports 1 x 'Standalone Programming Project'
•
This standalone project supports programming of a complete device including
FLASH, EEPROM, Fuses etc.
Multiple powering options
•
Programmer can be powered from the PC USB port, target system or external power supply.
Firmware upgradeable
•
New algorithms and features can be added via a simple firmware upgrade
Compact physical size ideal for held-held production or field use
•
The programmer is designed to be portable so it can be used for production or field use.
