EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
8
ii.
Documentation and software for the EPSILON5-MK4
programmer
In line with our policy of continuous improvement, the software and associated documentation for this
product are updated on a regular basis. You can download the latest software, firmware, User
Manuals and application notes for the EPSILON5-MK4 programmer from the following pages on the
Equinox website:
1. EPSILON5-MK4 programmer
See
http://www.equinox-tech.com/products/details.asp?ID=1575&displ=tl
You may be asked to register / log in to download some of these files.
iii. Device algorithm - Application notes
The table below lists the Application Notes available for helping to create
‘Programming Projects’
for different device families.
Application
Note
Device Family
Programming
Interface
AN100
Atmel - AT89Sxxxx FLASH microcontrollers
SPI
AN101
Atmel - AVR FLASH microcontrollers via the SPI Interface
SPI
AN105
Atmel - AVR FLASH microcontrollers via the JTAG Interface
JTAG
AN118
Generic I2C 24xxx Serial EEPROM memories
I2C
AN122
Atmel - AT91SAM7 ARM7 FLASH microcontrollers
JTAG
AN128
NXP – LPCxxx ARM7 FLASH microcontrollers
JTAG
AN130
Zensys – ZWxxx – Z-WAVE Series devices
SPI
AN138
Using an ELF file to program an Atmel AVR microcontroller
SPI / JTAG
AN140
ST STM32 Fxxx ARM Cortex FLASH microcontrollers
JTAG
These application notes can be found in PDF format on the CD-ROM which was supplied with the
programmer. You can also find the very latest versions on the
“EPSILON5-MK4 Download Page
" on
the Equinox website.
