EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
6
Product Documentation
i. Overview
This manual provides an overview of the contents of the 'EPSILON5-MK4' Programming System plus
associated hardware and software. References may be made to other hardware and software
products which are not covered in detail in this manual. Please refer to the table below for a list of
sources of documentation and/or browse to
http://www.equinox-tech.com
Software:
EQTools Script Builder – Manual
This software is used to create and upload
‘Standalone
Programming Projects’
to the programmer.
The following sources of documentation are available for this
software:
•
Installation and Getting Started Guide (pdf manual)
•
Help file
ASCII Text Communications Protocol – Application Note
This protocol can be used to control the programmer from an
external controller via RS-232.
The following sources of documentation are available for this
protocol:
•
Application Note – AN110.
Upload Wizard - Standalone Project Upload Utility
This software utility is used to upload
‘Standalone Programming
Projects’
to any Equinox programmer. These projects can then be
used in Standalone Mode, i.e. without a PC.
•
Please follow the on-screen instructions within the Upload
Wizard utility itself.
•
Application Note - AN117
SPI In-System Programming (ISP) – Application Note
This application note describes how to develop and implement ISP
support for the Atmel AVR microcontroller family. This is a standard
feature with the EPSILON5-MK4 programmer.
The following sources of documentation are available for this
software:
•
Application Note – AN101
•
Device Support List
