EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
62
5
PROG_RESET O
RESET
Target RESET control pin
This pin controls the Target Device
RESET pin. It will driven HIGH/LOW
according to the device type and settings
in the ‘Pre-program State Machine’ tab in
the Eqtools project.
6
PROG_GND
P
GROUND
Ground Connection
Common ground connection between
PROGRAMMER and Target System.
Key
O - Output from programmer to Target Device
I - Input to programmer from Target Device
P - Passive eg. GROUND and power rails
N/C - Not connected
