EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
44
3.4 Programmer Operating Modes
The EPSILON5-MK4 programmer can be controlled in various different ways as detailed in the table
below:
# Programmer
Mode
Connect
to PC
USB
Port
Control Method
/ Software
Upgrade
License
Required
Functional description
Refer
to
section
1 Development
Mode
Yes
EQTools - EDS
Standard
Feature
In this mode, the programmer
is controlled by EQTools -
Equinox Development Suite
(EDS). EDS allows you to
read/write the target device
FLASH / EEPROM / FUSE /
LOCK bits interactively under
PC control without uploading
a ‘Programming Project’ to
the programmer.
3.5
2 Standalone
Mode
No
None
Standard
Feature
In this mode, the programmer
is not connected to a PC and
can program a single
‘Programming Project’ into
the Target Device when the
<YES> key is pressed. (A
valid project must have been
previously uploaded to the
programmer using EQTools –
Upload Wizard.)
3.6
Key
S – feature available as standard
U – a license upgrade must be purchased from Equinox to enable this feature.
