EPSILON5 MKIV - USB Programmer - User Guide V1.05 19/09/12
52
In Standalone Mode you can:
•
Select 1 x
‘Standalone Programming Projects’
using the keypad
•
Plug the Programmer ISP cable into a Target System
•
Program the selected
‘Standalone Programming Project’
into the Target Device
•
Unplug the Programmer ISP Cable from the Target System
•
Plug the Programmer ISP Cable into the next Target System
•
Repeatedly program the same
‘Standalone Programming Project’
once it is selected
To execute a Programming Project in Standalone Mode:
#
Action
Observation / comment
1
Connect the programmer to a spare PC USB
port
2
Apply power to the Programmer / Target
System
Programmer Target Vcc LED illuminates
3
Upload your
‘Standalone Programming
Project(s)’
to the programmer
See EQTools Manual – Project Upload Wizard
for full instructions.
4
Disconnect power from the Programmer /
Target System
5
Disconnect the USB lead from the
programmer
Programmer is no longer controlled from PC
6
Follow the instructions to program the Target
Device in Standalone Mode
