Epson SureColor F6370 User Manual Download Page 86

Page: 86 / 135

If the product control panel displays

, press the up or down arrow button to select the number of

the best pattern in C1 and press the

button. Repeat this step for all the color patterns.

After you select the final color pattern number, the control panel returns to its ready status.

Parent topic:

Print Head Maintenance

Related references

Maintenance Menu Settings

Performing Head Maintenance

If ink smears onto your printed media even after cleaning the print head, you should perform head
maintenance to clean inside the product near the print head.

Use the head maintenance kit that came with your product to perform head maintenance.

Remove any paper loaded in the product.

Press the left or right arrow on the product control panel to highlight the

tab and press the

button.

You see the

Maintenance

menu on the product control panel screen.

Select

Head Maintenance

and press the

button.

You see a message asking you to prepare the head maintenance kit.

Press the up or down arrow button to select

Yes

then press the

button.

The product moves the print head out of the way.

Summary of Contents for SureColor F6370








































































































































Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands

Epson SureColor F6370, User Manual

Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands